Universal Versatile Handheld Quick Wire Stripper is a practical tool that can help you strip wires quickly, efficiently, and safely. It's equipped with a sharp and adjustable blade, allowing it to process a wide variety of wires without a hitch!
How to Hold
✓ Hold the tool with your dominate hand. ✓ Position the machine between your thumb and pointer finger. ✓ Squeeze the stripper and let the blade tip enter the hole.
Set Cutting Depth
✓ Adjust the blade depth to an estimated level based on the wire you . are stripping by turning the adjustment screw. ✓ When adjusted properly there should be minimal pulling force and the blades should glide across the insulation. ✓ For difficult wires the blade angle can be adjusted by slightly loosening the screw holding the blade, repositioning the blade, and tightening.
Wire Stripping
✓ Choose a hole on the wheel slightly larger than the wire. ✓ Set the blade tip to the correct height. ✓ Insert the wire about one inch past the wheel from the back of the machine. ✓ Pull the wire through the front of the machine, keep pulling until the entire wire has passed the wheel. ✓ Find the slit and pull the copper out of the insulation.
Specifications
✓ Good for most wires from 24 AWG (3/64") and up, either solid or stranded. ✓ Great wire stripper for on-the-go users looking to strip small sections of scrap wire. ✓ This machine may not be able to strip wires thicker than 10 AWG, especially with tougher insulation. ✓ Product Size: 3-1/2" x 1-3/4" x 2"
